The rising needs of the products aesthetic display was followed by the powder lack manufacturers, creating a wider range of selection.
Tough it’s needed to use different components in the outside and inside.
The powder coating technology uses the RAL colorscale for color indentifying, but colors of the PATONE and NCS system can be worked out as well.
Based on this, the following coatings can be created:
• Smooth glossy: gloss with 60˚ angle
80-90 % ISO 2813
Thickness of stratum 60-90 μm
• Silk gloss: gloss with 60˚ angle
55-65 % ISO 2813
Thickness of stratum 60-90 μm
• Matt: gloss with 60˚ angle
10-25 % ISO 2813
Thickness of stratum 60-90 μm
• Deep matt: gloss with 60˚ angle
3-5 % ISO 2813
Thickness of stratum 60-90 μm
• Fine structure matt: gloss cannot be measured
Thickness of stratum 70-90 μm
• Rough structure glossy: gloss cannot be measured
Thickness of stratum 80-120 μm
• Heat resisting coating MOR-TEMP (only available in black,silver,white)
gloss with 60˚ angle
2-20 % ISO 2813
Thickness of stratum 50-70 μm
Heat resistance can reach 420 C˚
• Anti-static coating –matt : gloss with 60˚ angle
20-40 % ISO 2813
Thickness of stratum 60-80 μm
Surface resistance 108-105 Ohm/square
CECC STC 00015/1
• Colorless enamel coatings (the enamel coating can be layered both on raw or painted surfaces)
gloss with 60˚ angle
in case of glossy: 90-100 % matt :40-50 %
Thickness of stratum 60-80 μm
• Thick layer coating for surfaces of deep fryer baskets and separating grids
1. The materials used, has been developed specially for surfaces of fryer deep fryer baskets and separating grids.
2. Thickness of stratum min 100 μm
3. can be done as an only layer coating
4. primer coating with cover layer
5. the coating and the coating system is used since more than five years and our customers are satisfied
• Special methods:
1. coating, substituting hot calvanizing ,with a cover layer minimum 120 μm thickness
2. renewing painting
3. renewing painting wih paint removing
Opening Hours:
Monday-Friday
8:00 to 16:00
Customer Service:
